Syringes & Disposables

2-150 ml FLEX syringes, 60" patient tubing with T-connector, 2 sterile spikes

2-200 ml FLEX syringes, 60" patient tubing with T-connector, 2 sterile spikes

1-150 ml FLEX syringe, 60" patient tubing, 1 sterile spike

1-200 ml FLEX syringe, 60" patient tubing , 1 sterile spike

2-150 ml FLEX syringes, 60" patient tubing with T-connector, 1 Quick Fill Tube

2-200 ml FLEX syringes, 60" patient tubing with T-connector, 1 Quick Fill Tube

2-150 ml FLEX syringes, 60" patient tubing with T-connector, 1 large saline spike & 1 small contrast spikes

2-200 ml FLEX syringes, 60" patient tubing with T-connector, 1 large saline spike & 1 small contrast spike

1-150 ml FLEX syringe, 60" patient tubing , 1 Quick Fill Tube 

1-200 ml FLEX syringe, 60" patient tubing , 1 Quick Fill Tube

Two 200-mL syringes, 60-inch patient tubing with T-connector, one large saline spike, and one small contrast spike.

Two 200-mL syringes, 60-inch patient tubing with T-connector, and two spikes.

 Two 200-mL syringes, 60-inch patient tubing with T-connector, and one Quick-Fill Tube.

One 200-mL syringe, 60-inch patient tubing, and one sterile spike.

One 200-mL syringe, 60-inch patient tubing, and one QuickFill Tube.

One Sensor Interface Disposable and one MEDRAD^® HandiSTRIP.

For use with MEDRAD^® Vistron CT, MEDRAD^® EnVision CT, and MEDRAD^® MCT Plus injection systems.

For single-use-only syringe-based contrast power injection systems for CT procedures. 

A sterile disposable transfer set for CT and MR injection systems.

Specifically for use with Bayer MEDRAD^® CT injection Systems.

For clear visualization of both contrast and air, facilitating your fluid path monitoring.

Single-handed set-up for quick and simplified tubing attachment.*
MEDRAD^® Twist & Go and MEDRAD^® Twist & Go HPCT must be used together.

The flexibility to deliver hand injection with the accuracy of an injector.

Helps to maintain a sterile environment in a catheterization lab.

A multi-patient (up to five patients sheathed) and a single-use device (unsheathed) hand controller.

A 150-mL syringe, pre-assembled spikes, drip chambers, saline, and contrast tubing, all rated for up to five patients.

Contains multi-guard connectors, dual-line tubing, pressure isolation valve (PIV), waste port, and a rotating luer connector. 

FasTurn syringe for angiographic applications that comes with or without a Quick-Fill Tube.*

For empty sterile hand syringes or empty sterile syringes for single-use-only syringe-based contrast power injection systems for MR procedures.

Two syringes (115 mL for saline and 65 mL for contrast), a large and small spike, 96-inch low-pressure connector tube with T-connector and check valve. 

Two Qwik-Fit Syringes (115-mL for saline and 65-mL for contrast), a large and small spike, 96-inch low-pressure connector tubing with T-connector and check valve.

Two 65-mL front-load syringes, 96-inch low-pressure tubing, one large spike for saline, and one small spike for loading contrast, a T-connector, and integrated check valve.

A female-to-female adaptor that can load contrast from a prefilled syringe.

A sterile disposable transfer set for CT and MR injection systems.

Source Administration Set (SAS), Patient Administration Set (PAS), and printer labels.