Unlock Your Connected Future with the MEDRAD®Centargo CT Injection System

Injector (Pedestal)

• Dimensions (WxDxH): 76.2 x 68.6 x 167.6 cm
• Weight (approximate): 77.8 kg (171.5 lbs.)

Overhead Counterpoise System (OCS)

• Dimensions (WxDxH): 39.2 x 49 x 122.6 cm
• Weight (approximate)*: 112.16 kg (247.1 lbs.)

Workflow Hub (Control Room Unit)

• Touch Screen Display
  • Dimensions (WxDxH): 35.7 x 18.9 x 27 cm
  • Weight: 3.2 kg (6.61 lbs.)
• Hub
  • Dimensions (WxDxH): 21.1 x 7.9 x 13.6 cm
  • Weight: 1.2 kg (2.7 lbs.)

*Weight includes: MAVIG Centargo OCS Mounting Plate, ceiling columns, and injector column, upper and lower arms, injector interface bracket, internal cable, and injector system

Fluid Delivery Method

• Piston-based

Fluid Loading

• Contrast media: 50 mL to 500 mL. Imaging bulk pack or single-dose vial presentation
• Saline: 50 mL-1000 mL

Day Set (volume)

• Three x 200 mL reservoirs
  • Two contrast media (same API*)
  • One saline

Air Detection

• Three inlet air sensors to detect when bottles and bags run empty
• One outlet air sensor to detect air before it reaches the Patient Line
• Reservoir air detection and automatic air removal

Battery Performance (Pedestal configuration only)

• Up to 16 hours or up to 60 injections

Displays

• Two independent, Wi-Fi enabled, full color, touch screen units with modern graphical user interfaces located in the scan room and the control room

Barcode Reader

• Contrast details auto populated to system such as brand, concentration, vial size and use life

Integrated Prime Container (volume)

• 680 mL container with volume indicator depicted on dual displays

*API= active pharmaceutical ingredient

Volume Range

• 1 mL to 200 mL for contrast and saline phases; 1 mL to 400 mL for DualFlow phases (in 1 mL increments)

Flow Rate Range

• 0.1 to 10 mL/sec in 0.1 mL/sec increments

DualFlow

• Simultaneous injection of contrast and saline in increments of 5%

Programmable Pressure Limit

• From 50 psi to 300 psi in 1 psi increments (also displayable in kPa and kg/cm²)

Programmable Delay

• One second to 900 seconds in one second increments

Pause

• Maximum pause time of 20 minutes

Injection Capabilities

• Maximum of 6 phases per injection. Maximum of 10 injections per exam.

Skip to Next Phase

• Enables the user to stop the current phase of an injection and start the next phase

Patency Check / Test Inject

• Real time flow rate adjustment and multi-phase test injections

Day Set*

• Pre-assembled
• Designed for set-up in less than two minutes
• Recessed connection to reduce contamination risk
• Labeled for twenty four (24) hours of use or 25 bottles of contrast media, whichever comes first

Patient Line

• Single use, 250 cm
• Snap-in single hand design
• Two check valves, auto-primes upon insertion
• Recessed connection to reduce contamination risk

Replacement Spikes*

• Labeled for use with 1 bottle/bag of fluid. Replace the spike with every bottle change.

Saline Tag

• Attached to saline source used to deliver multiple single doses to multiple patients. Once the port of saline container is punctured, the Saline Tag should not be removed during the entire period of use.

*Replace the spike with every bottle change. Discard disposables in case of suspected fluid path contamination.

Remote Connectivity

• Available on the injector

Barcode Reader

• Available on the injector

Automated Documentation*

• Modality Worklist Integration
• PACS Interface

Processing Productivity*

• RIS Interface
• Speech Recognition Interface
• Radimetrics® Interface

Scanner Interface*

• ISI2
• Connect.CT

Protocols*

• Personalized Contrast Dosing Software: P3T® Bundle
  • Cardiac CT
  • CT Pulmonary Angiography
  • CT Abdomen

*May require additional software purchase